how to program 5512RVF channels logic

I don't know how to program L5512RVF to join two channels by an Or relationship in the "logic tab"
and how to program
1、2 channel joined by an Or relationship
3、4 channel joined by an Or relationship
5、6 channel joined by an Or relationship
7、8 channel joined by an Or relationship
9、10 channel joined by an Or relationship
11、12 channel joined by an Or relationship ？？？

 

Do you want channel 1 and channel 2 to come on whenever a single group is on

or

do you want something else.

Basically, the logic gives you four extra groups to use to turn channels on.

So for example, lets say that channel 1 is group "front light" and channel 2 is group "front entry".

Now you want to turn both of these on from a single switch (many ways to do this, but for the purpose of this example we will do it this way), we assign a third group to the switch called "Welcome"

We put a tick in the ch1 and ch2 box and select or at the bottom and we add this group to the first logic row for the relay.

What this allows is for another switch to activate ch1 1 independently of ch2, but also turn both on together.

I hope that is all correct as I am going from memory and don't have toolkit in front of me to double check.

I think this should also be covered in the training manuals as well that you can get from the CIS website - it is strongly recommended that you at least read them.

Mick

 

Thank you,Mike

Thank you for your help!
But I want to program the channel 1 and channel 2 to Or relationship,so when turn on channel 1,channel 2 will be turn off.
For example,channel 1 is "curtain open",channel 2 is "curtain close"

 

Buy a PAC.

 

gee PSC, you're a man of many words...

 

I know

 

don't you mean ... "yep"