Inhibiting a button via another Switch or homegate

Discussion in 'C-Bus Toolkit and C-Gate Software' started by mikegriff, May 27, 2005.

  1. mikegriff

    mikegriff

    Joined:
    Aug 3, 2004
    Messages:
    153
    Likes Received:
    3
    Location:
    Wales
    E2000 Series, 4 Gang Key
    We have two of the above and wish to inhibit the operation of one switch from the other location, that location also has homegate
    The buttons in question is set to fire off a scenes in Homegate
    Is this possible without Logic
    Thanks
    mike
     
    mikegriff, May 27, 2005
    #1
  2. mikegriff

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    You will have to use logic.
     
    ashleigh, May 28, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Homegate via CGate not working

  2. Switching between homegate and another application

  3. Serial C&M via Ctouch via 5500PC

  4. Saturn Switch Fixed Button Cap Labels

  5. HomeGate Button "Pressed Effect"

  6. Copy Switch Program to Different Switch

  7. Schedule vs Switch Input - Switch is winning!

  8. eDLT button LED control via logic

Loading...