Integrate with 3rd Party Audio Control System

Discussion in 'General Discussion' started by Godwin Mathew, Jun 29, 2010.

  1. Godwin Mathew

    Godwin Mathew

    Joined:
    Apr 6, 2009
    Messages:
    25
    Likes Received:
    0
    Location:
    Kuwait
    Hello Guys,

    i have a new Cbus project in my hand..where am using DLT switches,relays and dimmers..the client need to control volume of the speakers from the DLT Switch..the Audio System is based on IP...do anyone tried this before..?or how does the integration done..?
     
    Godwin Mathew, Jun 29, 2010
    #1
  2. Godwin Mathew

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    It may be possible...

    If you have the protocol documentation for the third party system, you may be able to implement IP control of this third party system using the Logic Engine on a device that supports socket connections (Colour C-Touch or Wiser).

    Then, assuming you can get this working, it shouldn't be too difficult to map the control of the volume to a c-bus group address, or to up/down trigger commands.

    Nick
     
    NickD, Jun 29, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. HomeGate with 3rd Party IR control?

  2. C-Bus B&W Touch Screen as 3rd party screen

  3. Tools for 3rd party Apple IOS developers

  4. 3rd party RS232 and PACA

  5. Get string from 3rd party device by TCPIP

  6. Have you used a 3rd party GUI interface?

  7. How do i integrate Cbus with 3rd party

  8. 3rd Party Device Interfacing

Loading...