LED flickering

Discussion in 'C-Bus Toolkit and C-Gate Software' started by JK Mallik, Apr 18, 2012.

  1. JK Mallik

    JK Mallik

    Joined:
    Dec 19, 2011
    Messages:
    1
    Likes Received:
    0
    Location:
    India
    Hi All,

    I have connected 9W Philips LED with C-Bus 0-10V analogue dimmer and Relay. But it is giving flickering. what could be possible reasons?
     
    JK Mallik, Apr 18, 2012
    #1
  2. JK Mallik

    DarylMc

    Joined:
    Mar 24, 2006
    Messages:
    1,313
    Likes Received:
    49
    Location:
    Cleveland, QLD, Australia
    The 0-10V unit is not made for driving lamps.
    Stop now if that is what you are doing.
     
    Last edited by a moderator: Apr 18, 2012
    DarylMc, Apr 18, 2012
    #2
  3. JK Mallik

    Matthew

    Joined:
    Oct 26, 2007
    Messages:
    260
    Likes Received:
    1
    Location:
    Adelaide
    Hi JK
    Can you describe what you have connected? or post a diagram or a picture?
    Most LED's flicker at low levels of dimming when using an incompatible dimmer.

    Regards
    Matthew
     
    Matthew, Apr 19, 2012
    #3
  4. JK Mallik

    tobex

    Joined:
    Nov 3, 2006
    Messages:
    728
    Likes Received:
    0
    Location:
    Sydney, Australia
    Usually this is a problem associated with leading edge dimming having unbalanced capacitance or trailing edge dimming having no capacitor.

    This is very situation specific and the solution is not difficult. Only situations where the dimming system and flickering causes problems should the capacitance be taken into consideration.
     
    tobex, Apr 19, 2012
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.