LED Status problem

Just a small issue with toolkit. When you select the LED Status drop-down box on a switch, it automatically selects 'Always OFF' and spits you out of the drop-box The first time you use it.

 

Hi Jason,

I tried this on an 8 Key neo.. seems fine to me.. can you provide more detailed steps to reproduce?

 

OK reproduced it with a KEY1, will log it .. #9477

thanks!

 

Duncan,

I had to go through all 80+ Reflection switch's and change the LED status from "Always Off".

I just added a 4 key Reflection into a DB and the LED status was set to "Always Off" on all 4 keys.

 

That'd be a painful process...

I just checked.. setting a key on a Reflection switch to control a group results in the Indicator Status going to "Status(on)"..

I suspect you're setting them to a Scene Function and not seeing them change?

 

Exactly

 

I was using a key2 unit, also noticed that bus couplers do it too - don't know about other units...