Lighting and Dali scene.

Discussion in 'General Discussion' started by sean_ets, Oct 23, 2018.

  1. sean_ets

    sean_ets

    Joined:
    Oct 1, 2018
    Messages:
    2
    Likes Received:
    0
    Hi
    I’m trying to make a scene with both Dali and lighting applications. Is there anyway to do that on an edlt? There isn’t a wiser at this job.

    Cheers
     
    sean_ets, Oct 23, 2018
    #1
  2. sean_ets

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,534
    Likes Received:
    175
    Location:
    Adelaide, Australia
    You could try creating the dali scene in another device with the same trigger group as the lighting scene in the edlt. Then when you execute the lighting scene it should trigger the dali scene. The dali scene will need to be in another device since you can't trigger a scene in the same device (although I have not tried this in an eDLT). Anyway, the theory should work.
     
    Ashley, Oct 24, 2018
    #2
  3. sean_ets

    sean_ets

    Joined:
    Oct 1, 2018
    Messages:
    2
    Likes Received:
    0
    Ok great. Thank you. I’ll give that a go.
     
    sean_ets, Oct 24, 2018
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Scene control with a scene

  2. Scene Modify - Scene Toggle

  3. master scene switch controlling other scene switches

  4. Maxium lighting loads per scene?

  5. Toolkit 1 12 0 and old temp and lighting sensors

  6. DALI Emergency Lighting Test on CBUS

  7. Not all Dali lights turn on every time with cbus but do with dali programmer

  8. Not all Dali lights turn on every time with cbus but do with dali programmer

Loading...