Logic programming using PAC!!

Discussion in 'C-Bus Wired Hardware' started by Younes1981, Feb 8, 2011.

  1. Younes1981

    Younes1981

    Joined:
    Jan 17, 2011
    Messages:
    5
    Likes Received:
    0
    Location:
    Kuwait
    i ve wrote some logic codes , using PICED logic Engine and i do not know how to let it work with my Cbus project.
    i only have 1 PAC, how can i use it as a PC interface and execute the logic project at the same time??
     
    Younes1981, Feb 8, 2011
    #1
  2. Younes1981

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    When you use the PAC as a PCI (for example, with C-Bus ToolKit), it will stop running any logic.
     
    Darren, Feb 9, 2011
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 06-044-1 CNI Programming Using Lantronix Device Installer

  2. Programming the PAC through C-bus

  3. Strange behaviour of PAC while using COM

  4. buscouplers, relays and PAC programming

  5. Using Using a Shutter Control Relay as a Change over Relay

  6. B&W c-touch 5080CTL c/w logic programming

  7. Programming Toolkit with a PAC

  8. Programming access from toolkit to C-Bus using Wiser Wifi Router

Loading...