lutron

Discussion in 'C-Bus Wired Hardware' started by micelisun, Nov 12, 2008.

  1. micelisun

    micelisun

    Joined:
    Aug 1, 2008
    Messages:
    11
    Likes Received:
    0
    anyone have experience with lutron shades being controlled from c-bus inputs?
     
    micelisun, Nov 12, 2008
    #1
  2. micelisun

    Pink Panther

    Joined:
    Jul 1, 2007
    Messages:
    26
    Likes Received:
    0
    Location:
    Auckland, New Zealand
    Sivoia

    If it's the Sivoia range you're looking at, suggest you check out the Lutron website for tech details. Believe you need a HomeWorks processor to control these babies.
     
    Pink Panther, Nov 12, 2008
    #2
  3. micelisun

    micelisun

    Joined:
    Aug 1, 2008
    Messages:
    11
    Likes Received:
    0
    It is sivoia, I have a homeworks processor on the job. just hoped someone had done this before and could save me a litttle time in the RS232 department.Thanks
     
    micelisun, Nov 12, 2008
    #3
  4. micelisun

    Pink Panther

    Joined:
    Jul 1, 2007
    Messages:
    26
    Likes Received:
    0
    Location:
    Auckland, New Zealand
    HomeWorks RS232

    Check out this link:

    http://www.lutron.com/techinfo/SpecSheets/143004EAa199607.pdf

    Gives you the RS232 Protocol for HomeWorks, and maybe a few clues on how to procede. Probably no quick answer for you ... unless someone has sat down and worked through this document and is prepared to share code with you.
     
    Pink Panther, Nov 12, 2008
    #4
  5. micelisun

    micelisun

    Joined:
    Aug 1, 2008
    Messages:
    11
    Likes Received:
    0
    I was hoping someone had, thanks for the input though.
     
    micelisun, Nov 13, 2008
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Lutron and c-bus

  2. clipsal key pads & lutron homeworks

  3. Taking over a Lutron Install

Loading...