MATRIX control from wiser

I have a customers installation with wiser control and a matrix switcher with 8 zones. Now the customer wants to control his matrix through his ipads and iphones that he has strewn around the house. I have set it up to control each zones through the widgets in wiser, but how do i control the functions of the matrix through the wiser.

So my questions are as follows:

1. How can i change the radio stations on the matrix from the wiser interface?

2. How do i control the ripple software from the wiser interface?

3. Is there anyway of dynamic labling in the wiser interface?

I have searched all other threads here and have not found anything that answers these questions.

Any help would be muchly appreciated.

Cheers Brenton

 

More to that problem

So Also on top of that issue im having trouble on the same job with controll of the audio zones from a web browser.

Control works fine when used with the ipads and iphones. But when trying to adjust from the web browser it just shows volume as 0 % and the speaker has a cross through it like its mute. When i go to trebble and bass they both show 0% ?????

If i have the iphone open to the audio control page and have open say the trebble and bass of the office zone they are both showing 50%. Then i open up wiser in the web browser and look at the trebble and bass for the office they both say 0% when i press the plus or minus buttons on the trebble or bass on the web browser i instantly see the treeble or bass go to 0% on the iphone. It happens the same with the volume input as well?? If i hold the up button it will ramp up to have a volume out but as soon as i release the button it goes to zero?? The input selection still works on the web browser though???

Any ideas?

 

Does nobody have any ideas?

Surely someone out there has had simmilar troubles and can shed some light on which way i should attack this problem. Please guys?

 

I haven't quite got there yet but I have a feeling I'll be right behind you. I'll let you know how I get on!

Cheers


Jon

 

Well hopefully between us we can see what we can work out. It seems no one else on the forum can shed any light on the situation?

 

A few thoughts;

To change the radio stations are you talking about an IR remote signal or just a source change?

I'm not using the ripple software - I have the older version for now...

You can dynamic lable in MSRPA to a DLT so interesting to see if Wiser picks this up too.

 

For item 2, my understanding is that's not currently supported. For item 3, Wiser can show System IO strings and these can be modified dynamically in Logic.

 

Ok so we cant controll ripple from wiser, does anyone know if this will be supported in the future?

Ok so logic and system IO Strings? How do i make this work?

Cheers buddy

 

Yeah i just want to change the radio station on the actuall matrix switcher. No Ir output required. I tried today to do it with trigger control but no luck.

 

Hey Guys,

I would like to assume you have read the up to date application notes for the new audio eqiupment and its functionality..

Find them here:
http://www.cbusforums.com/forums/sho...light=app+note

I have followed the instructions in these and successfully have Matrix control of radio station and streaming through wiser using dynamic 1 and 2.. No dynamic labelling yet though.. Still playing with that..

Cheers,
Nik

 

Cheers nik,

I dont know if i have checked that out or not. can you repost the link because it does not seem to work for me?

Cheers Brenton

 

http://www.cbusforums.com/forums/showthread.php?t=5970

if that still does work.. head out to main page of cbusfoprums and go to 'technical support application notes' section and open MRA Aplication notes thread by conformist..

Cheers,
Nik

 

cheers thanks nik,

Will give that a crack and let you know how i go.

Brenton

 

Link doesn't work, can you repost?