Maual Overide on with a PIR

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Otters, Mar 10, 2005.

  1. Otters

    Otters

    Joined:
    Aug 3, 2004
    Messages:
    16
    Likes Received:
    0
    Hi all,
    Can any tell me how they program a one key and a four key switch to be used as a manual overide for a PIR? If so is their a way to do this without using logic?

    Thanks Otters
     
    Otters, Mar 10, 2005
    #1
  2. Otters

    Michael

    Joined:
    Aug 3, 2004
    Messages:
    46
    Likes Received:
    0
    OK..... Need a little more information.
    Are either of the key units in view of the PIR?

    If the answer is yes, then your out of luck, as the PIR will see you first and turn the light on. The internal timer starts and will not be stopped if you disable the unit at this point.

    However, if the answer should be no, then put the same GA that controls the light into the 'Disable' group of the PIR. Then the key unit (also with the same GA) will turn on (Toggle Function) the light and disable the PIR at the same time....

    Cheers,
     
    Michael, Mar 11, 2005
    #2
  3. Otters

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Newman, Mar 14, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. prob with nirt unit with daikin ac

  2. How to trigger scene in Touchscreen with PIR ?

  3. Humidistat Fan Control With Key Overide and Fallback

  4. 5753PEIRL "0" lux setting and overide

  5. Help with Logic for PIR, Light Sensor

  6. Enable PIR with light level from another PIR

  7. Disable PIR and switch with scene, then enable again with all off

  8. Help with 5750WPL PIR Please!!

Loading...