maximun ability

hi all a little dumb question pls..

what is the maximun ability PACA can support.. i mean how many scenes, grouping and etc.. and what is maximun unit in a network..


the second is, can the c-touch colour or other key input unit cotrol the unit from other network, toggle on/of, scene, and etc.. like example the key input or c touch colour in network 1 and want to control a scene from network 2..
this to network are connected by a network bridge??? if can, how many network can it supported by 1 c- touch or maybe monochrome touch screen??

 

Properties for a Pascal Automation Controller project :
Maximum number of Pages : 100
Maximum number of Components per Page : 250
Maximum number of Schedules : 250
Maximum number of Scenes : 250
Maximum number of Components per Scene : 100
Maximum number of Users : 0
Maximum password length : 0
Maximum number of Access Levels : 0
Maximum number of Irrigation Programs : 0
Maximum number of Irrigation Zones : 0
Maximum number of Master Loads : 0
Maximum number of Special Days : 0
Maximum number of System I/O variables : 0
Maximum number of logic timers : 20
Maximum number of logic Modules : 50
Maximum number of logic ConditionStaysTrue : 50
Maximum number of Networks : 10
C-Touch/PAC Firmware Version : 2.20.0 - 2.39.99
Minimum C-Gate version : V2.6, build 2207

Typically 80 - 100, there are a number of factors that can alter these numbers.

Yes

Or a CNI.

Colour C-Touch: 20

PAC: 10

B&W C-Touch: 10

 

Good post PSC,

I can see you being taken off moderation any day now

 

Thanks PSC, i'm trying to design a system with more than 50 Network, use in a condominium. each story using one c- bus network, there is 50th story. later they all link together.

actually i'm not very sure it can work smoothly or not. there is also a lighting in stage that we are connected it to a DMX module.

it's my first time to design such of this huge network. hope later if i get stuck can get help from all you guys again..

thanks.

 

Schedule Plus would be a better solution for such a large project -

Maximum number of Pages : 250
Maximum number of Components per Page : 500
Maximum number of Schedules : 500
Maximum number of Scenes : 500
Maximum number of Components per Scene : 500
Maximum number of Users : 200
Maximum password length : 12
Maximum number of Access Levels : 50
Maximum number of Irrigation Programs : 20
Maximum number of Irrigation Zones : 100
Maximum number of Master Loads : 5
Maximum number of Special Days : 500
Maximum number of System I/O variables : 500
Maximum number of logic timers : 200
Maximum number of logic Modules : 200
Maximum number of logic ConditionStaysTrue : 250
Maximum number of Networks : determined by C-Gate license
Minimum C-Gate version : V2.6, build 2207

 

Totally agree

 

If you are attempting something this big for the first time, I would suggest having a chat with our helpful Technical Support people. It is important that you get the network architecture correct, and a bit of planning now could save a lot of hassles later on.