Minder C Bus Address, re-addressing

Discussion in 'C-Bus Wired Hardware' started by Ashley W, Jan 11, 2010.

  1. Ashley W

    Ashley W

    Joined:
    Aug 4, 2004
    Messages:
    304
    Likes Received:
    3
    Location:
    Canberra
    Recently I had to replace my old home minder system with one I brought off Ebay. When I installed the new one it assumed the address of 255 which is understandable, but for some reason I am not able to re-address it using tool kit. Any ideas?
     
    Ashley W, Jan 11, 2010
    #1
  2. Ashley W

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    Minder is not supported in TK.

    You need to download the old V2 commissioning s/w, and use that to re-address the minder. DO NOT try and use it for setting up other items of equipment, in other respects it is now too out of date.
     
    ashleigh, Jan 11, 2010
    #2
  3. Ashley W

    Ashley W

    Joined:
    Aug 4, 2004
    Messages:
    304
    Likes Received:
    3
    Location:
    Canberra
    Thanks thought that might have been the case.
     
    Ashley W, Jan 12, 2010
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus to Minder

  2. minder-c-bus tag files

  3. Toolkit Unit Addressing

  4. Using Area Addressing

  5. Light level sensor, group addressing

  6. B&W MKII re addressing itself???

  7. IP Port number and IP multicast address reserved by Clipsal for C-BUS systems

Loading...