Monitoring Air Conditioner

Discussion in 'General Discussion' started by zip_cool, Feb 22, 2008.

  1. zip_cool

    zip_cool

    Joined:
    Sep 14, 2006
    Messages:
    80
    Likes Received:
    0
    Hi There, i have a project that we need to monitoring the air conditioner, so that we know the air conditioner is in on position or off position. :D

    the air conditioner brand is mcquay.

    what the customer want is that he can monitor the air cond in someroom, so that if there is no people in that room, but the air cond in on position, he can turn it of through his room from c-bus.:D
     
    zip_cool, Feb 22, 2008
    #1
  2. zip_cool

    Mr Mark

    Joined:
    Jan 27, 2006
    Messages:
    323
    Likes Received:
    5
    Location:
    FNQ
    MacQuay AC

    zip cool.

    We have used MacQuay AC's in the past - the ducted system had a simple plug in card with volt free contacts for on/off control, on/off status and fault indication. Can't remember costing on these but the guys from MacQuay were helpful to deal with. If I can dig out some contact details I'll post them...

    Mark
     
    Mr Mark, Feb 23, 2008
    #2
  3. zip_cool

    zip_cool

    Joined:
    Sep 14, 2006
    Messages:
    80
    Likes Received:
    0
    thanks mark.. yup, 6he type we have is ducting type.. can u tell me what card is that.. maybe can give me a link, so i can learn it// thanks.
     
    zip_cool, Feb 23, 2008
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.