Mono T/S with Logic

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by nigeltodd, Aug 4, 2010.

  1. nigeltodd

    nigeltodd

    Joined:
    Sep 27, 2005
    Messages:
    32
    Likes Received:
    0
    Location:
    Melbourne
    I have a situation where this touchscreen is adjusting it's time very regularly, often with in a few seconds or minutes of the previous occurrence. It usually on changes the time by a few seconds.

    I have been advised that there may have been a bug in PICED which produces this behaviour. The screen was programmed using v4.7.1.

    Does anyone have any recollection of this,and how to get around the problem.

    I am continuing to monitor the system to see if problem persists after some changes in toolkit.

    Thanks!
     
    nigeltodd, Aug 4, 2010
    #1
  2. nigeltodd

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    I don't recall anything like that. There was a problem recently with Colour C-Touch causing the time to change by exactly an hour which was related to daylight savings. This was fixed in V4.8.4

    I would suggest using the C-Bus Diagnostic Utility to see if there are time change messages on C-Bus and then see which unit is sending them.
     
    Darren, Aug 4, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Advanced features on CTouch (Mono) required

  2. All of Button(with a Ssturn +mono touch sreen).

  3. Using 5080CT2 Mono Screen on Icontrol

  4. CTC and MONO no sync

  5. mono touch screen

  6. Wiser logic same as b&w screen logic

  7. Mounting a C-Touck Mono Mk2 in Portrait orientation

Loading...