Multiple groups

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Dave Byron, Feb 22, 2005.

  1. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    I have notice that same same group number (221) can be added to toolkit - it happens when the group is not in toolkit database but in ctouch.
    For every ctouch source you get the group added to toolkit.
    Seems like ctouch does not check for duplicates.

    dave
     
    Last edited by a moderator: Feb 22, 2005
    Dave Byron, Feb 22, 2005
    #1
  2. Dave Byron

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Dave, can you please describe the steps needed to get this to happen ?
     
    Darren, Feb 22, 2005
    #2
  3. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    Groups

    Darren
    Was running toolkit 1.1.4 and thought i would clean out junk groups from toolkit so deleted the group, then started two copies of ctouch development and put online and thats the result.
    Found the group was in a scene in each touch source.
    Send all my files to Ryan to have alook at.

    dave
     
    Dave Byron, Feb 22, 2005
    #3
  4. Dave Byron

    Richo

    Joined:
    Jul 26, 2004
    Messages:
    1,257
    Likes Received:
    0
    Location:
    Adelaide
    If you are running muliple copies of software accessing the same C-Gate then this can happen. This will be fixed at some point in the future, but there is no real workaround at the momenet other than to be careful. :(
     
    Richo, Feb 23, 2005
    #4
  5. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    Richo

    sounds right - goes with the number of ctouchs i start at same time
    dave
     
    Dave Byron, Feb 23, 2005
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Adding Groups

  2. Controlling multiple groups easily without using a scene

  3. Dimmer Control of Multiple Groups Problem

  4. Controling Multiple Groups of a single button

  5. Controlling multiple groups from a switch

  6. NEO, multiple timers on multiple keys, same group

  7. Multiple Groups controlling One Light

  8. SENPIRIB absence detection for multiple groups

Loading...