Newbie - PC talking to Wireless

Discussion in 'C-Bus Toolkit and C-Gate Software' started by jhaddy, Nov 7, 2005.

  1. jhaddy

    jhaddy

    Joined:
    Nov 7, 2005
    Messages:
    1
    Likes Received:
    0
    I'm new to C-Bus.

    I'm about to specify a wireless installation and I'd like to know the minimum hardware required in order to use the C-Bus toolkit to set up the system.

    I assume that a Wireless Gateway is required - what else?

    This is probably answered in a FAQ somewhere but I couldn't locate it. :(

    Thanks.
     
    jhaddy, Nov 7, 2005
    #1
  2. jhaddy

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    To get chatting...

    To get Toolkit talking to a Wireless network you will need to communicate through a wired C-Bus network first. You will need a PC interface (5500PC), a power supply (5500PS) and a Wireless Gateway (5800WCGA).

    Fortuantely, if you're planning on doing more than 1 of these jobs, you could just fit all these boards to a small box and use it as a comissioning tool so that it's just a 1-off expense.
     
    Newman, Nov 7, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.