PAC Power woes...

Discussion in 'General Discussion' started by Mr Mark, Aug 7, 2009.

  1. Mr Mark

    Mr Mark

    Joined:
    Jan 27, 2006
    Messages:
    323
    Likes Received:
    5
    Location:
    FNQ
    Hello.

    Just wondering what others are using to power the serial ports on the PAC.
    To date both the Clipsal one (4T24) and the Hager option burn out the PAC after three to four months of operation.

    Regards,

    Mark
     
    Mr Mark, Aug 7, 2009
    #1
  2. Mr Mark

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    We have had PACs run for years from the Clipsal power pack with no problems.

    The PACs can be damaged by driving a serial port which is short-circuit. Is it possible that this is the problem?

    It would be good if these damaged units could be returned (if they haven't already) for us to find out what is going on.
     
    Darren, Aug 7, 2009
    #2
  3. Mr Mark

    Lucky555

    Joined:
    Aug 13, 2007
    Messages:
    229
    Likes Received:
    0
    Mr Mark

    I have successfully used a 16v AC plugpack commonly found powering domestic grade security panels...
     
    Lucky555, Aug 7, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. ServerX Woes

  2. PAC status after power failure

  3. PAC Power Failure Recovery

  4. PAC with PICED 4.8.0 Power Failure Restore

  5. Windows 7 64bit & Windows 8 64bit Parallels woes

  6. Power ON Multi room audio remote amplifier after power reset?

  7. Temperature Sensing Woes with Wiser.

Loading...