PAC vs C-Touch B&W MKII with Logic

Hi All

In terms of the logic that these devices have, what are the differences?

From reading, the PAC has 192kb of 'storage' for logic code, which can be changed upto 1000 times.

Do the scenes stored on the PAC use up the 192kb of storage for logic code?

Does the same apply to the c-touch?

Are there any other differences between the two units (besides one has a screen etc)

Cheers
David

 

PAC vs B&W C-Touch#2

Hi,

Checkout this thread for a discussion of some of the differences: http://www.cbusforums.com/forums/showthread.php?t=3830&highlight=PAC+C-Touch

In short the B&W C-Touch#2:
- Runs about 10 times faster, so can execute much more logic in a single cycle.
- Has more storage. Although the storage is shared with the graphics you will still get more than in the PAC.
- Has the screen which allows you to interact with your logic functions through System IO.
- They run the same logic code, so operate the same.

Hope that helps!

Cheers,
Mark.