Pac

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Dave Byron, Nov 4, 2007.

  1. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    Are there any plans for DLT text support in the PAC ???

    dave
     
    Dave Byron, Nov 4, 2007
    #1
  2. Dave Byron

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    We do plan to support it in the future. Labels use up a lot of memory, so we a need to work out exactly how to make it work.
     
    Darren, Nov 5, 2007
    #2
  3. Dave Byron

    amberelectrics

    Joined:
    Aug 29, 2007
    Messages:
    114
    Likes Received:
    0
    Bit of an out of interest and slightly OT here, but why do we not have the facility to add in extra RAM? Given the proliferation of extremely cheap memoryt cards for use in mobiles, phones and games consoles it should be extremely cheap to add the facility for the hardware at least, although I dont know how the PAC engine runs the firmware and so have no idea if it can even address expanded memory.
     
    amberelectrics, Nov 5, 2007
    #3
  4. Dave Byron

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    The PAC isn't like a PC where you can just plug in extra memory.

    It is designed to be used where you need a small bit of logic to implement some special requirements in a project. The intention has always been that if you have more complex requirements needing more processing and/or memory, then you should use a Colour C-Touch, HomeGate or Schedule Plus.
     
    Darren, Nov 6, 2007
    #4
  5. Dave Byron

    amberelectrics

    Joined:
    Aug 29, 2007
    Messages:
    114
    Likes Received:
    0
    Fair enough :)
     
    amberelectrics, Nov 6, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.