Parmco fan speed control

Discussion in 'C-Bus Wired Hardware' started by steve22537, Jun 5, 2008.

  1. steve22537

    steve22537

    Joined:
    Mar 5, 2007
    Messages:
    66
    Likes Received:
    0
    Location:
    Perth
    Hi Forum,

    We have just received our Parmco 90cm down draft extraction unit for our new kitchen. It came supplied with a dimmer mech, in this instance would I be able to get away by using a dimmer channel as opposed to using capacitors and relay contacts to vary the fan speed?

    I have no wattage rating for the fan motor (P1-9), but its air flow rating is 1000 cubic metres / hour.

    Steve
     
    steve22537, Jun 5, 2008
    #1
  2. steve22537

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    What dimmer mech was it supplied with? Perhaps that will give you some clue to the rating..

    Nick
     
    NickD, Jun 6, 2008
    #2
  3. steve22537

    steve22537

    Joined:
    Mar 5, 2007
    Messages:
    66
    Likes Received:
    0
    Location:
    Perth
    Hi Nick,

    The manufacturers have supplied a "500 watt variable resistive load controller"
    about the same size as a electroinc unit. Hope this helps.

    Steve
     
    steve22537, Jun 9, 2008
    #3
  4. steve22537

    Darpa

    Joined:
    Apr 30, 2006
    Messages:
    426
    Likes Received:
    0
    Location:
    Australia
    Your best bet would be to test the fan with a leading edge or universal dimmer, and see if the results are satisfactory.

    Darpa
     
    Darpa, Jun 10, 2008
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Parmco fan speed control

  2. How to control a 3 speed fan with a single C-Bus button?

  3. thermostat fan speed query

  4. Ceiling fan speed solution

  5. Fan Control (again) using either 3 relays or a sweep fan relay ?

  6. 3 speed fan only 2 speeds ???

  7. Fan speed from Thermostat to PAC?

  8. DLT and Fan speed Control

Loading...