Piced 4.13 and Wiser 1 remote update

Hi,

I have come across what I believe to be a bug, unless Piced 4.13 is not backward compatible with Wiser 1 / 1.5 remote updating.

I was running Piced 4.13, along with TK 1.14.1 of course, and tried to update a Wiser 1 and 1.5 remotely. The transfer utility opened fine, but could not find the Wiser.
I tried this via my usual network, but also via a separate internet dongle. Results are the same.
Then tried to update a Wiser 2, which worked fine.

I then downgraded Piced to 4.11.2 (just had that handy) after which Wiser 1 and 1.5 remote updates worked just fine.
Obviously I didn't waste my time to try and update Wiser 2 with that.

Those are my findings, but perhaps there is a setting in Piced 4.13 which needs to be done to do updates of the old Wisers. If so, advise in that regard would be much appreciated.

 

PICED Wiser home automation controller remote project transfer issue.

Hi Thomas,

I concur with you, there seems to be a bug in PICED 4.13.0.

My observation:

PICED 4.13.0.25 failed to remotely transfer a Wiser 1 project file.

PICED 4.12.0.0 successfully remotely transferred to Wiser 1, after rolling back to this version.

 

Thank you for this confirmation Brendan.