PICED 4.9 Error

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by constantcharge, Aug 2, 2010.

  1. constantcharge

    constantcharge

    Joined:
    Nov 23, 2004
    Messages:
    83
    Likes Received:
    0
    Location:
    Adelaide
    Hi Guys,

    Got a problem with PICED 4.9. Tried to do a transfer and got the following error:

    Error - 14034
    Error reading file.
    "C:\HomeGate\Projects\Current\Project.ctf
    Reason : Out of Memory
    Project file may be corrupted or too large

    Downgraded back to 4.8.4 and firmware as well and works fine.
     
    constantcharge, Aug 2, 2010
    #1
  2. constantcharge

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Was this error raised on the Colour C-Touch or PICED?
     
    Darren, Aug 2, 2010
    #2
  3. constantcharge

    constantcharge

    Joined:
    Nov 23, 2004
    Messages:
    83
    Likes Received:
    0
    Location:
    Adelaide
    Error was raised on CTouch not PICED.
     
    constantcharge, Aug 3, 2010
    #3
  4. constantcharge

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Does your C-Bus project have a lot of Networks and/or Applications?

    We made a change (#18616) to include all C-Bus tags in the CTC compact tag database, not just the ones being used. This makes the tag database file bigger and may be the cause of your problem.
     
    Darren, Aug 3, 2010
    #4
  5. constantcharge

    constantcharge

    Joined:
    Nov 23, 2004
    Messages:
    83
    Likes Received:
    0
    Location:
    Adelaide
    Yea I noticed that change had been made.

    Project consists of about 15+ networks.(Toolkit Tag file is approx 3.2MB) This is not the largest one I have. Just went to replace a CTouch that fell over.

    So I guess I will have the same issue with others projects?

    So when selecting networks in Network Manager they are still "saved" now even when says not used ?
     
    Last edited by a moderator: Aug 3, 2010
    constantcharge, Aug 3, 2010
    #5
  6. constantcharge

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Probably.

    We will see if this can be resolved in the next service pack. The change was originally made at the request of customers who wanted to have valid tags in the log for C-Bus messages from all networks. There might be some middle ground where we can provide more tags, but without having the tag file get too big.
     
    Darren, Aug 3, 2010
    #6
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.