PICED V4 Personality Flaw

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Lucky555, Nov 30, 2007.

  1. Lucky555

    Lucky555

    Joined:
    Aug 13, 2007
    Messages:
    229
    Likes Received:
    0
    Hi Guys,

    I have been programming C-Bus now for about 10 years or more :eek:
    I did my own place back in the very early days of C-Bus V2. For one reason and another my networks are numbered 1 and 2.

    Well the story goes - have added the C-Touch then the PAC along the way. Even have an old 01001101 01001001 01001110 01000100 01000101 01010010 in the background chugging away. Have been using PICED versions 2.x and 3.x throughout the journey. Just fired up PICED v4 to get the C-Touch to listen to my new Harmony remote and GUESS WHAT ????????????

    PICED V4 CAN'T DEAL WITH NETWORK NUMBER "1" :eek: :mad: :mad: :mad:

    When you run through the open existing project screens the screen that allows you to select the network has a blank drop down box. Went back into Toolkit to first rewrite the network number - no joy. Then used Toolkit to create a new "test" network at 254 back over to PICED and there is the "test" network ready to go. Pitty all my C-Touch objects in the project are written for network number "1".

    I'm off now to roll back all my C-Bus software and dig up some old project files - ohhh the joys.... :mad:
     
    Lucky555, Nov 30, 2007
    #1
  2. Lucky555

    Lucky555

    Joined:
    Aug 13, 2007
    Messages:
    229
    Likes Received:
    0
    Hi me again :)

    Rolled back all my software to the previous generation - Back in business now.

    Who said progress (software versions) actually means forward movement ?

    Now where was I ? ....... That's right Harmony remote :)
     
    Lucky555, Nov 30, 2007
    #2
  3. Lucky555

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    I can't duplicate this problem. I created a project using only network 1 and it loaded fine in PICED V4.0

    Can I get you to send your project archive into Tech Support and get them to forward it to me please ?
     
    Darren, Dec 3, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.