PIR's 360 Absence Detection

Discussion in 'C-Bus Wired Hardware' started by carlg, Feb 27, 2014.

  1. carlg

    carlg

    Joined:
    Jan 29, 2009
    Messages:
    43
    Likes Received:
    0
    How can I configure PIR's for Absence Detection so they don't turn the ON, but will turn the lighting off if left on.
     
    carlg, Feb 27, 2014
    #1
  2. carlg

    Memphix

    Joined:
    Aug 31, 2006
    Messages:
    248
    Likes Received:
    1
    Location:
    Australia
    Much the same, have a look at the blocks tab.

    If you have a search on the forum I think you'll find several others posting on the same thing.
     
    Memphix, Feb 27, 2014
    #2
  3. carlg

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,548
    Likes Received:
    178
    Location:
    Adelaide, Australia
    Set it up as normal, then on the function tab set Short Press Movement in Darkness (MD) to idle. This will stop it turning on the light, but if the light is on movement with continually retrigger its timer, and when the time expires ramp the light off
     
    Ashley, Feb 27, 2014
    #3
  4. carlg

    carlg

    Joined:
    Jan 29, 2009
    Messages:
    43
    Likes Received:
    0
    many thanks for the help
     
    carlg, Feb 28, 2014
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Bus 360 Multi Sensor

  2. Indoor/Outdoor/360 Deg Sensors

  3. 360 Deg. PIR specs

  4. The maximum operative range of the gauge 5753L (360)

  5. Wiser MCE Plugin and Xbox 360 Extenders

  6. Faults after absence / absynth!

  7. 5753L 360 PIR Occupancy Sensor

  8. SENPIRIB absence detection for multiple groups

Loading...