Power Failure And DLTs

Discussion in 'C-Bus Wired Hardware' started by pete-init, Nov 17, 2008.

  1. pete-init

    pete-init

    Joined:
    Aug 13, 2008
    Messages:
    7
    Likes Received:
    0
    Hi all,

    Working on a site at the moment which experienced two power outages recently of around 4-5 hours each time however we've now noticed that some DLTs are not doing what they were told.

    Has anyone had any experience of this or any advice?

    Cheers guys,

    Pete
     
    pete-init, Nov 17, 2008
    #1
  2. pete-init

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    Can you be more specific about what you mean by "not doing what they're told"?

    How are they configured? What are you expecting? What are you seeing?

    Cheers,

    Nick
     
    NickD, Nov 17, 2008
    #2
  3. pete-init

    pete-init

    Joined:
    Aug 13, 2008
    Messages:
    7
    Likes Received:
    0
    Hi Nick,

    Some of the DLTs appear to have lost their programming which was done through Toolkit. Also, some logic (via a PAC) is not functioning when buttons are pressed - none of the logic has been changed and worked flawlessly before re power outages.

    Pete
    INit
     
    pete-init, Nov 18, 2008
    #3
  4. pete-init

    NickD Moderator

    Joined:
    Nov 1, 2004
    Messages:
    1,427
    Likes Received:
    64
    Location:
    Adelaide
    Can you be more specific about what programming appears to have been lost?

    Is it the key functions/group addresses? Is it the labels? Is it everything?

    Maybe you can post screenshots from before (for example, from the database version of the unit's programming) and after (for example, from loading the unit's programming as loaded from the unit), so we can see what's changed.

    Re the logic not working.. do you have anything like a colour touch or the diagnostic utility or toolkit's application log that you can use to view what is being transmitted from the DLT in response to the key presses that no longer work?

    Nick
     
    NickD, Nov 19, 2008
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. SENPILL After Power Failure....

  2. Text and DLTs - Some suggestions for Toolkit

  3. 06-019-1 Enable & Disable Status After A Power Failure

  4. SENPILL (Multisensor) Occupancy sensor enabled after power failure

  5. Power Failure Recovery Problems

  6. C-bus state recall from C-Touch after power failure

  7. PAC status after power failure

  8. Dimmer slow to recover and power failure

Loading...