Powerlink NF3000GC and Clipsal

Discussion in 'General Discussion' started by industeq, Feb 26, 2009.

  1. industeq

    industeq

    Joined:
    Feb 8, 2009
    Messages:
    95
    Likes Received:
    0
    Location:
    Stafford, TX (Houston) USA
    In question if you can use any of the 16 physical inputs on the G3 controller to turn on/off a Clipsal relay unit?

    http://www.squaredlightingcontrol.com/viewitem.cfm/p_id/96/cat_id/86/subcat_id/102/pt_id/2

    Or can you use a PIR as a input on a G3 then use the logic within the C-bus?

    I know you can use a keypad (input) to turn on/off a G3 breaker but how about the other way?

    Sorry for the questions but new to Clipsal and the C-Bus Toolkit.


    Thanks
    Alan Dobbs
     
    industeq, Feb 26, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Clipsal cctv cameras and CAT5 cabling

  2. Gloria Jean's Coffees and Clipsal

  3. SQ D Powerlink G3

  4. Square D Powerlink NF3000G3 & Clipsal PCI

  5. Powerlink Breakers and Saturn Keypads

  6. C-Bus and Square D Powerlink

  7. Clipsal C-Bus Occupancy sensors controlling Powerlink breakers

  8. How to get C-Bus and PowerLink G3 to Play Together

Loading...