premise gateway-NIRT

is it possible to activate/triggering AC(aircond)/TV or other infrared device, from premisegateway through NIRT device??if yes,how?actually i've try to control TV but it still not work..as i know there is lighting and trigger in premisegateway...
thanks.

 

Should be as simple as turning lights on and off via premise gateway. Have you got that working? If so can you trigger the Nirt locally on the network via an key switch?

If you haven't managed to get the premise gateway switching a light on and off yet, that may be a good start. Sorry i can't help you getting that working as I have never used a premise gateway.

 

if you can trigger lights via premise gateway and can trigger the nirt locally from key switch, I really don't know why it won't work for you.

I suggest you contact tech Support and see if they can work it out. http://www2.clipsal.com/cis/technical/technical_support

Of course if anyone has something to add please post here.

 

A few things for nirt

First of all what is your network topology. Where does PG sit on the network.

(Please say it just a single network project)

Also are you triggering nirt from the trigger application, or lighting application

Also have you used the http://www2.clipsal.com/cis/technical/downloads/commissioning_tools#Diagnosticutility

look at your local commands that work and then look at what is coming out of your PG.

If you want help resolving this then send me a export of the PG config file and your nirt project and i will take a look. (normally i charge for my services but because its a PG i will do it out of pure interest if your willing).

 

memory stack on premise gateway

 

Maybe Pulse instead On?

May be you should try "Pulse" instead "On"? i.e. switch GA On for 1 second and then switch Off?

 

it should be work fine if you're triggering it from the lighting application..

 

it works..

it work properly with lighting application in PG services.

thanks to all
irza