Prevent arbitrary reset of realsystemIO to 0

Discussion in 'C-Bus Wiser 1 Controller' started by stofilyuk, Mar 6, 2018.

  1. stofilyuk

    stofilyuk

    Joined:
    Jan 25, 2012
    Messages:
    22
    Likes Received:
    0
    Location:
    Russia
    Hello,

    A while ago I faced with the problem of reset accumulated meters' data and other global constances to the '0' value (without wiser rebooting) due to unknown reason. It happens once per 2 weeks. Periodically the 'glitch' is accompanied by the android app being unable to connect to unit and the absence of connection with C-Bus through PICED software.

    Should you help to clear this whole situation out, it will be a great of help. If you need any additional information - don't hesitate to ask whatever you need.
    Thanks in advance,
    Gena


    P.S. On the photo the values have just been uploaded from the unit.
    Default project, that is restored after reboot, has different values.
     

    Attached Files:

    Last edited: Mar 6, 2018
    stofilyuk, Mar 6, 2018
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. New Reset Unit Button

  2. Reset Installer Default

  3. Color C-Touch Auto reset

  4. Prevent PIR turning Lights off

  5. factory reset w/less gateway

  6. Dimmer clock and burden boxs reset

  7. OT: Remote reset of mcb

  8. Reset Wiser IP addresses and router config

Loading...