Problem with DLT Labelling

Hello to all!

I'm dealing with a problem regarding labeling DLT.

I can easily modify the labels of the DLT as far as concerning single groups. On my DLT i have as secondary application the "Trigger Control" and when i want to label a button for TRIGGER CONTROL the DLT does nothing and what i get is "Button 1".

Using Toolkit, i went to Trigger Control, found out the group i want and then gave the DLT label that i want (the label wasn't in red color ). The result was the same as above.

I even set Button 1 to UNUSED (after changing the DLT Label of the group of Trigger Control) and then set it back to the same group of Trigger Control again. The result again was the same.

Any ideas?

 

Use the search function to find this;

Unable to apply labels for Trigger Control on DLT

lots of stuff in there
dave

 

I'll try something else instead of labeling trigger control groups and having it as secondary application.

Thanks guys for your immediate reply though.

 

"""" Set the buttons as scene buttons, then you should be able to label them with no troubles. """"

And now a new problem arises:

How can i label the scene and so can be visible to DLT button?

 

dlt labeling

hi ,
first off create a dummy address maybe all off say on button 1 of dlt set it to on/off save this to dlt and then go back in and now change it to the scene you require.hope this helps.

cheers conor

 

dlt labelling - a bug in 1.8.1

Previously you could label an individual Action selector.

But with 1.8.1 this can only be done by selecting the Network, Dlt Labels, Trigger Control; Type the label you want, and save. (this saves all the labels at once rather than individually as before)

I have been told that this will be fixed.

 

I finally discovered the programming philosophy/theory of DLT keyswitches and now everythnig are working perfectly here, according to my needs.

Thanks guys for your reply, though.