Programming Toolkit with a PAC

Discussion in 'C-Bus Wired Hardware' started by Mike Costello, May 27, 2014.

  1. Mike Costello

    Mike Costello

    Joined:
    Dec 9, 2013
    Messages:
    47
    Likes Received:
    0
    Location:
    UK
    Hi,

    Please can someone tell me if you can programme Toolkit using a PAC.

    I originally programmed a job using a PC Interface but have ended up leaving it on a job as a CBus to Control4 interface.

    I have got a PAC and I tried to connect t the network with this through Toolkit using the USB on the front.

    It did say in the manual it could but I can't get it to work

    Do I need to buy another PC Interface or can I use this

    Thanks
    Mike
     
    Mike Costello, May 27, 2014
    #1
  2. Mike Costello

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    770
    Likes Received:
    21
    Location:
    Adelaide
    Hi Mike Costello,

    Yes the PAC, Wiser, CTouch etc do have a PCI passthrough capability, however this should be considered a "spare wheel" feature for emergencies. We have seen in practice that it creates more problems than it solves. You would need to contact Technical Support for assistance with your specific scenario.

    For best results we recommend that you use the software with a dedicated PCI or CNI.
     
    daniel, May 28, 2014
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Programming the PAC through C-bus

  2. buscouplers, relays and PAC programming

  3. Error on Global Programming (DLT) for Toolkit 1.10.5

  4. Programming C-Bus Wireless with Toolkit

  5. Logic programming using PAC!!

  6. errors on first time toolkit programming

  7. Cbus & toolkit - programming and connection help

  8. Programming access from toolkit to C-Bus using Wiser Wifi Router

Loading...