Push to Wiser 1 still working ?

Discussion in 'C-Bus Wiser 1 Controller' started by shocks, Aug 23, 2024.

  1. shocks

    shocks

    Joined:
    Jun 28, 2009
    Messages:
    3
    Likes Received:
    0
    Location:
    Melbourne
    Hey all

    Just wondering if folk are still successfully able to push a project to a Wiser 1 unit using latest PICED (4.15.2) /CGATE (3.3.3) software?

    I am able to successfully pull a project from the device but any push results in the following socket error
    : Socket Error # 10054\r\nConnection reset by peer

    Any guidance would be much appreciated !

    Cheers
    Shane



    Logs below:

    [22:23:27.284] [Information] [General ] [None ] [WiserExecute() ] Starting Wiser transfer process...
    [22:23:27.284] [Information] [General ] [None ] [WiserExecute() ] Checking actions to perform...
    [22:23:27.284] [Information] [General ] [None ] [WiserExecute() ] Retrieve project = No
    [22:23:27.284] [Information] [General ] [None ] [WiserExecute() ] Transfer project = Yes
    [22:23:27.284] [Information] [General ] [None ] [WiserExecute() ] Update firmware = No
    [22:23:27.804] [Information] [File Retrieve ] [None ] [PGTransferProcess() ] Transferring project
    [22:23:27.804] [Information] [Device Discovery ] [None ] [ConnectToUnit() ] Connecting and authenticating with the local Wiser device at 192.168.0.3 on port 8336
    [22:23:27.804] [Information] [Communications ] [TCP ] [LoginToHG() ] Connecting and logging in to Wiser device...
    [22:23:27.804] [Information] [Communications ] [TCP ] [LoginToHG() ] Logging in to Wiser 1 / 1.5 device
    [22:23:27.804] [Information] [Communications ] [TCP ] [Login() ] Logging in to device...
    [22:23:27.804] [Information] [Communications ] [TCP ] [Login() ] Attempting connection to 192.168.0.3:8336...
    [22:23:27.942] [Information] [Communications ] [TCP ] [Login() ] Successfully connected to device
    [22:23:27.942] [Information] [Communications ] [TCP ] [Login() ] Logging in to device
    [22:23:27.942] [Information] [Communications ] [TCP ] [Login() ] Successfully logged in to device
    [22:23:27.942] [Information] [Communications ] [TCP ] [Login() ] Wiser login completed
    [22:23:27.942] [Information] [Communications ] [TCP ] [LoginToHG() ] Connection and login to Wiser completed
    [22:23:27.942] [Information] [Communications ] [TCP ] [UploadProject() ] Uploading project to the device...
    [22:23:27.942] [Information] [Communications ] [TCP ] [UploadProject() ] Sending project filename to device
    [22:23:27.946] [Information] [Communications ] [TCP ] [UploadProject() ] Writing project file c:\clipsal\piced\projects\test4\test4.tar.gz
    [22:23:27.946] [Information] [Communications ] [TCP ] [PutFile() ] Sending file to device...
    [22:23:27.946] [Information] [Communications ] [TCP ] [PutFile() ] Connecting to device for file transfer
    [22:23:28.074] [Information] [Communications ] [TCP ] [PutFile() ] Writing file name to device
    [22:23:28.074] [Information] [Communications ] [TCP ] [PutFile() ] Writing file size to device
    [22:23:28.074] [Information] [Communications ] [TCP ] [PutFile() ] Writing file to device
    [22:23:28.074] [Error ] [Communications ] [TCP ] [UploadProject() ] *** BEGIN EXCEPTION ***
    [22:23:28.074] [Error ] [Communications ] [TCP ] [UploadProject() ] *** Type: EIdSocketError
    [22:23:28.074] [Error ] [Communications ] [TCP ] [UploadProject() ] *** Method: UploadProject()
    [22:23:28.074] [Error ] [Communications ] [TCP ] [UploadProject() ] *** Message: Socket Error # 10054\r\nConnection reset by peer.
    [22:23:28.074] [Error ] [Communications ] [TCP ] [UploadProject() ] *** END EXCEPTION ***
    [22:23:28.074] [Information] [Communications ] [TCP ] [UploadProject() ] Project upload completed
    [22:23:33.597] [Error ] [General ] [None ] [WiserExecute() ] Transfer failed
    [22:23:35.901] [Information] [Communications ] [TCP ] [Destroy() ] Shutting down TCP infrastructure...
    [22:23:35.901] [Information] [Communications ] [TCP ] [Destroy() ] TCP infrastructure shut down complete
     
    shocks, Aug 23, 2024
    #1
  2. shocks

    shocks

    Joined:
    Jun 28, 2009
    Messages:
    3
    Likes Received:
    0
    Location:
    Melbourne
    On another computer , with a clean install of below versions, a project push to the Wiser 1 works fine.

    ToolKit 1.16.2.2558
    C-Gate 2.11.10
    Piced 4.14.1.142

    Following upgrades of toolkit (1.17.7) and Piced (4.15.2.255), the transferring of a project to a Wiser 1 device fails.

    Unless other are experiencing otherwise, this looks like a Clipsal software problem.
     
    shocks, Aug 24, 2024
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. I'm still finding Originating Unit randomness

  2. 5504GI still playing up

  3. Linked smoke detectors but still own dry contacts per detector

  4. How to avoid the multi sensor blue light but still have occ sens

  5. No clock and Burden is always grey - still everything works.

  6. Is CIS still alive?

  7. wiser production 6 weeks and still waiting

  8. Wiser sending PUSH notifications

Loading...