Ramp Off from a switch

Discussion in 'C-Bus Toolkit and C-Gate Software' started by praveen123, Nov 22, 2015.

  1. praveen123

    praveen123

    Joined:
    Mar 3, 2013
    Messages:
    26
    Likes Received:
    0
    Location:
    kuwait
    I need to program a switch in these manner

    (a) short press : Toggle the Group address between On and Off but it should be like these
    Switch On - instantaneously
    switch off - Ramp off in 20 sec.

    (b) Long Press : Dimmer function .

    Please help me to program it.
     
    praveen123, Nov 22, 2015
    #1
  2. praveen123

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,548
    Likes Received:
    178
    Location:
    Adelaide, Australia
    The toggle function can only toggle between OFF and ON. To do what you want you would need a logic device like a touchscreen, wiser or pac.
     
    Ashley, Nov 23, 2015
    #2
  3. praveen123

    [email protected]

    Joined:
    Nov 24, 2015
    Messages:
    1
    Likes Received:
    0
    Location:
    kuwait
    ramp off and on

    try this
     

    Attached Files:

    [email protected], Nov 24, 2015
    #3
  4. praveen123

    Ashley

    Joined:
    Dec 1, 2005
    Messages:
    1,548
    Likes Received:
    178
    Location:
    Adelaide, Australia
    No good. The lights will take 20 seconds to ramp on. Not what was asked.
     
    Ashley, Nov 25, 2015
    #4
  5. praveen123

    praveen123

    Joined:
    Mar 3, 2013
    Messages:
    26
    Likes Received:
    0
    Location:
    kuwait
    I tried that program, it is taking 20 sec to both switch ON and Switch off . These is not my requirement , i just need to switch On instantaneously and Switch Off after 20 sec.
     
    praveen123, Nov 26, 2015
    #5
  6. praveen123

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    On instant and off with a 20 second delay.

    You need a device with a logic engine.
     
    ashleigh, Nov 29, 2015
    #6
  7. praveen123

    praveen123

    Joined:
    Mar 3, 2013
    Messages:
    26
    Likes Received:
    0
    Location:
    kuwait
    I have touchscreen by that i can run logic,i tried it too by using some dummy group addresses,but im missing somewhere in logic, Could you please send me sample coding for that program .
     
    praveen123, Nov 30, 2015
    #7
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to ramp off two areas at once?

  2. Set time period in which to ramp on / off

  3. Ramp time with Ramp to Level command

  4. neo switch-ramp off

  5. neo ramp off timer

  6. All groups switch off on one group ramp to zero

  7. Ramp down / Set off

  8. How to create gentle on/off ramp in PICED for touch screen

Loading...