I have found a small bug when programming Reflection switches (Not sure if it happens with other styles). When using the "Enable Night Light" option (and this happens in both working on the network and in the database) if you tick the option and apply changes to the unit it takes the info and the night light works (if on network), then when you open the unit again the option comes up as not being ticked even thou the night light is on. If you then apply any changes you made without touch the night light option it will turn it back off....:mad: Had to return to site after making some small switching changes because all of a sudden the night lights aren't working. I was using Toolkit 1.5.1 and the firmware on the switches ranged from 1.4 to 1.7 accross all gangs.
