Remote Programming of CTC

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Jesmond, Oct 5, 2009.

  1. Jesmond

    Jesmond

    Joined:
    May 18, 2005
    Messages:
    107
    Likes Received:
    0
    Location:
    Victoria
    Hi Guys,

    I have a customer that has a CNI and CTC on their ethernet, if I do all the port fowarding on their router will I be able to upload a PICED file to their touch screen ? Is there anything I need to be aware of ?

    Any other suggestions for remote access to both toolkit and the CTC ?

    Regards
     
    Jesmond, Oct 5, 2009
    #1
  2. Jesmond

    Darpa

    Joined:
    Apr 30, 2006
    Messages:
    426
    Likes Received:
    0
    Location:
    Australia
    Just be careful about opening up ports. If their router supports using a VPN, definately use that method, as opening up ports without any sort of firewall or user authentication can be very dangerous in this day and age.

    It will let you in, but it will also allow any bored teenager or russian hacker access as well.
     
    Darpa, Oct 5, 2009
    #2
  3. Jesmond

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    The best way to enable remote updates to a colour C-Touch is to use a Wiser as the router. There are various security features already in place if you do it this way.
     
    Darren, Oct 6, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Remote Programming

  2. CTC Client problem

  3. Temp Sensor with CTC

  4. remote programming

  5. Remote Programming

  6. CTC and remote connection via wiser

  7. Remote Programming

Loading...