Rescue C-Touch

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Mr Mark, Feb 13, 2008.

  1. Mr Mark

    Mr Mark

    Joined:
    Jan 27, 2006
    Messages:
    323
    Likes Received:
    5
    Location:
    FNQ
    I pulled out an old black and white touch screen tonight to program up - half way through transferring the project, the c-bus connection was broken. Now the touch screen has a blank screen, makes a soft 'tick' sound about twice a second and I can no longer connect to it.

    Is there any way to rescue this screen?

    Mark
     
    Mr Mark, Feb 13, 2008
    #1
  2. Mr Mark

    Mr Mark

    Joined:
    Jan 27, 2006
    Messages:
    323
    Likes Received:
    5
    Location:
    FNQ
    Fixed

    Waited for half an hour and tried again.
    Updated the Firmware (was trying to do this when the connection was lost) and back in business.:D

    Mark
     
    Mr Mark, Feb 13, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. C-Touch Firmware Update? Version 2 C-Touch

  2. How to rescue your network when all C-Bus clocks are turned off

  3. C-Touch not responding to touch input

  4. Control Scene on C-Touch A, From C-Touch B?

  5. Long Touch - B&W Touch Screen Mk II

  6. C Touch poor touch response

  7. Touch failure in MarkII touch screen

  8. Upgrading from C-Touch to C-Touch MkII

Loading...