Ripple control and Dimmers

Discussion in 'C-Bus Wired Hardware' started by bartmannz, Mar 20, 2006.

  1. bartmannz

    bartmannz

    Joined:
    Oct 16, 2005
    Messages:
    14
    Likes Received:
    0
    Hi

    Re-dug up this problem - we are still having problems with a 2 Amp dimming circuit pulsing with the ripple control for heating. The Frequency is 1050Hz

    This is a new installation with new C-Bus equipment. The lights most affected are the 150 watt halogens fitting No, the down lights (12 volt) appear to not be affected

    Any help would be great
    :confused:
     
    bartmannz, Mar 20, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CBUSv1 - 4 Channel Dimmers and Ripple Control Tones

  2. 300Hz Ripple

  3. Wiser to control Ripple without Matrix

  4. Ripple Internet Radio Streaming

  5. Ripple - whats its purpose

  6. Ripple V1.1 Released

  7. Wiser problems with Ripple and iOS app

  8. Wiser2's Inbuilt Ripple Server

Loading...