Rollershutter logic

Discussion in 'C-Bus Wired Hardware' started by trucker01, Feb 20, 2014.

  1. trucker01

    trucker01

    Joined:
    Jan 11, 2014
    Messages:
    65
    Likes Received:
    0
    Location:
    Adelaide
    What is the logic command to a shutter relay to shut ? (not toggle)

    -Solved-
    SetLightingState("Shuttername",ON); //Open Off for closed
    doh obvious :)
     
    Last edited by a moderator: Feb 20, 2014
    trucker01, Feb 20, 2014
    #1
  2. trucker01

    rhamer

    Joined:
    Aug 3, 2004
    Messages:
    673
    Likes Received:
    3
    Location:
    Melbourne, Australia
    You'll need stop too, so you can partially open the shutter.

    I think from memory the value is 2%

    Cheers

    Rohan
     
    rhamer, Feb 21, 2014
    #2
  3. trucker01

    trucker01

    Joined:
    Jan 11, 2014
    Messages:
    65
    Likes Received:
    0
    Location:
    Adelaide
    setlight level to 2 ?
     
    trucker01, Feb 21, 2014
    #3
  4. trucker01

    Memphix

    Joined:
    Aug 31, 2006
    Messages:
    248
    Likes Received:
    1
    Location:
    Australia
    Yes

     
    Memphix, Feb 25, 2014
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Logic

  2. Logic explaination... please...

  3. Article Discussion Logic functions in output units

  4. Logic Engine

  5. What PAC logic could

  6. Wiser logic same as b&w screen logic

  7. Rollershutter relays

  8. Rollershutter/Awning Window

Loading...