Saturn Switch Fixed Button Cap Labels

I've seen some Saturn switch prelabelled button caps here: http://www.cbus-shop.com/product_info.php?cPath=161_36_34&products_id=250

Will these work with the wired saturn switches in the 5086NL range which have the Blue/Orange LED indicators?

Thanks

 

Hello,

Yes they will work with the CBUS Saturn Wired Switches..

Cheers..

 

Ah that's good. It's not clear on the product picture if the buttons allow the indicator lights to shine through. They look pretty solid to me but would be great if the light shone through the text or icon on the button!

 

Ah I see what you are asking now..

I am unsure whether the LED illumination shows through the text.

Cheers..

PS I should add the little buttons are terribly fragile when you try to swap the caps..

 

Hi Roosta,

I just sent a pack to a client. Do you know, has the pack been recently (or not so) updated to new button descriptions without a change of part code?

see attached images of previous(?) and current.

All the multiple 'Light', 'Fan' and 'Heats' seem to mainly have gone to be replaced by room names? This makes sense unless you have lots of single non-descript rooms with ceiling fan, light and heater!!!

Regards,

Brad

 

Hopefully your customer got sent the correct ones as there are 2 variants..

60PBC Which is a pack of 60 labelled caps for 240v Saturn switches.. (2xKitchen, 1xBed, 1xBed 1, 1xBed 2, 1xBed 3, 1xBed 4, 1xStudy, 2xExhaust, 2xBath, 2xGarden, 6xFan, 6xLight, 6xHeat, 2xEntry, 2xLaundry, 2xLounge, 2xGarage, 2xFamily, 2xDining, 2xOutside, 2xSensor, 2xToilet, 10x'Cats Eye')

and

5080LC-8 Which is a pack of 66 labelled caps for CBUS Saturn switches.. (Not sure What the breakdown is, but picture here: http://www.integratorsforum.com/showthread.php?t=4922)

2 ways to tell the difference.. 1 being the way the cap attaches to the switch itself, 60PBC uses a single clip in center of the cap, and the 5080LC-8 use 2 posts on opposite sides of the underneath of the cap..

I am unaware of any changes having been made to the actual description on the labels..

With regard to the LED status using the 5080LC-8, the text is black on the caps but the led will show around the outside of the button.. Supposedly..

Cheers.

 

Well there's your problem!!!! Client had 240v Saturn not C-Bus.

Thanks Roosta, I hadn't seen the 240V ones before.

Brad

 

Ha Ha.. Yep its a sticky one now, especially with some jobs using the 30M CBus Mech in 240v saturn plates..

Cheers..