Setting up Scenes seems to produce frequent posts on this Forum. Since completing my C-Bus training I have only created some very simple scenes. Looking at the literature for Scenes available on the Clipsal web site makes me wonder if more could not be offered. I have some questions on Remote Triggering but firstly here are links to some of the literature I found and some comments. [URL]http://www.cbusforums.com/forums/showthread.php?t=439[/URL] This is a useful document and fills in many gaps ? but still leaves me with a few queries. Suggest it is moved from the current Forum location of ?General/Announcements? to ?C-Bus Products/Quick Tutorials?. [URL]http://www2.clipsal.com/cis/technical/technical_support/training2/cbus_control_and_management_system/basic[/URL] [COLOR="Red"](then navigate to "Scene Programming" near the bottom of the page)[/COLOR] This training manual is exclusively devoted to Scenes and was a comprehensive document in its day. It is now way out of date. I would like to see it updated as a complete reference to Scenes. [URL]http://www2.clipsal.com/cis/__data/page/2857/14934_C-Bus_Basics_Training_Manual_Vol_2.pdf[/URL] [COLOR="Red"](see pages 72 to 77)[/COLOR] This is the current C-Bus Basic Training Manual Vol. 2. It contains only basic information on Scenes and no information about Remote Triggering. The Help file in Toolkit does not provide a lot of assistance for Scenes. One part of the Help (C-Bus wired input units/Neo style key input units/2 key input/configuration/Scenes tab) says ?Defining scenes requires a trigger group.? I believe this is incorrect as Scenes can be created without trigger groups. I could not find any reference to the Key Function ?Scene Modify? in any documentation, including the Toolkit Help. There are references in Forum posts. Here are some questions I have about Remote Triggering:- (These all relate to Wired Networks (i.e. NOT Wireless Networks). (1) All keys on an Input Unit can only use the one Trigger Group ? correct? (2) If (for example) the Key Input Unit was an 8 button Neo and the eight available scenes were all set up with different configurations AND there was a need to Remotely Trigger separately each scene then each scene would need a separate Action Selector and each of these could use any value from 0 to 255 to Activate (or Set) the scene, but only one scene could be active at a time ? correct?
