Senll to control 5753PEIRL and lamp

i have a plan to make :
1. when the harvest lux bigger then target senlll (light level sensor device), senll would turn the lamp off.
2. When lux becoming low , then senll will trigering 5753 PEIRL to detect any motion.
3. if 5753 peirl capturing object movement , then lamp will be turn on.
4. last, after 5 minute if not detect any object movement, the lamp will be turn Off.

do you have any idea for sequence and device setting , in order to fulfill my plan as above.

thank in advanced

rgds
vincent

 

For item 1 I would consider using the in-built light level maintenance feature of the 5753PEIRL and not use a separate light level sensor. It is configured on the Light Level tab of the UI for the 5753PEIRL.

Items 2, 3 and 4 are standard 5753PEIRL behaviour, so there should be no issue there.

 

HI . thanks for respons

OK thanks Newman,
i'll try to do it..

rgds
vincent