Sentemp

Discussion in 'C-Bus Wired Hardware' started by janine, Apr 7, 2006.

  1. janine

    janine

    Joined:
    Jan 13, 2006
    Messages:
    17
    Likes Received:
    0
    hi,

    novice question, but which group will be set according to the temp variations that i can then use to nable/disable other equipment....
    is it the controlled group or the enabled group.
    i'm a little confused as in other hardware the enabled group usually enables/disables the functioning of the equipment.

    I want to use the readings to set a tag on/off so that i can do alot of things according to the temp readings

    Thanks
    Janine
     
    janine, Apr 7, 2006
    #1
  2. janine

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Janine

    The Group address that the SENTEMP will change is the Controlled Group. This is the Group Address that you will want to monitor.

    The Enable Group (no d on the end of Enable) group is used to enable/disable the temperature sensor.
     
    Newman, Apr 7, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Wrong T reading with 5031ES SENTEMP

Loading...