Setting C-gate to communicate with CNI

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by zip_cool, Sep 4, 2008.

  1. zip_cool

    zip_cool

    Joined:
    Sep 14, 2006
    Messages:
    80
    Likes Received:
    0
    hi all, how to set the c-gate2 to communicate with CNI.

    in my project, i already can program the c-bus thorough CNI connect to local area network (the ip address we set to 192.168.1:14000) with c-bus toolkit.

    i also can program the CTC through the network.
    but the probelm is i can monitoring from the home gate.
    that must be something missing.

    can some one please help me..
     
    zip_cool, Sep 4, 2008
    #1
  2. zip_cool

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    In HomeGate, select the C-Bus project you created in ToolKit. Select the Options | Connect to C-Bus menu item, and you will be connected to C-Bus.

    It will take a minute or two for C-Gate to scan the network before you can start to use C-Bus with HomeGate. The View | Network States menu item will show you the state of the C-Bus networks.
     
    Darren, Sep 5, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Setting up CNI

  2. Setting recall levels via C-Gate?

  3. Setting Recall Levels thru C-Gate

  4. Setting Wiser CNI IP Address

  5. Toolkit unable to communicate with PCI

  6. Communicate beween ethernet (CNI) networks

  7. Setting C-Bus Date and Time from C-Gate with a PAC Present

  8. Help with setting up EDLT to override disable a multi-sensor

Loading...