Show status of one group - press icon sends bell press to another group

Discussion in 'C-Bus Automation Controllers' started by Bigdave, Aug 29, 2020.

  1. Bigdave

    Bigdave

    Joined:
    Dec 4, 2006
    Messages:
    39
    Likes Received:
    0
    Location:
    Canberra
    Hi there,

    Learning how the SHAC works etc. I can't find or can't search to find something.

    My Garage doors are on Group 1 and 2
    My Bus Coupler is on Group 3 and 4

    I want to show the group status on Visualisation of 3 with an Icon. and when I press that Icon, it triggers group 1

    How does one do that?

    (yes I am going to go on the LUA/Shac automation course)
     
    Bigdave, Aug 29, 2020
    #1
  2. Bigdave

    lcrowhurst

    Joined:
    Dec 2, 2004
    Messages:
    275
    Likes Received:
    98
    Location:
    Sydney, NSW, Australia
    One way is to have 2 objects , sitting on top of each other.
    object 1/group one set to a blank icon.
    object 2/group 3 set to the icon(s) status you want, and set it to READ ONLY.

    You could also use the Alternative icons setting on Object 1
    add a Down icon for 1 %
    and and up Icon for 99%
    (have the 0% and 100% icon set to a moving icon)

    Then have a bit of code that sets object 1 value to 1% and 99% when the group 3 goes on/off
     
    lcrowhurst, Aug 30, 2020
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Rs232 confusion. press a button sends rs232

  2. Door bell press and door bells?

  3. GI unit displays one value and sends another

  4. Can you adjust close time of bell press?

  5. EDLT 1 button bell press with 2 groups

  6. eDLT bell press problem

  7. eDLT Bell Press Mod

  8. Put an Icon on top of Icon for Grarge Door Opener Button

Loading...