Shutter Control on CTouch

I am sure this is probably a dumb question, however, I am struggling to work out how to program a shutter relay on a CTouch MkII.

The switches in Toolkit have specific Shutter options but I cannot work out how to achieve this in PICED.

I would like to have an open and close button (easily done) that if pressed mid open function will stop the curtain. I am struggling to do this as every function I try triggers the reverse function (ie open or close)

Any help much appreciated.

Glen

 

In PICED select the component menu then Place Tool. Under category select Shutters. This gives you 6 options for 1, 2 or 3 button operation.

a) 1 Key operation: One key alternates between open, stop, close, stop etc.
b) 2 key operation: Add a 2 key close toggle that alternates between close and stop, and add a 2 key open toggle that alternates between close and stop.
c) 3 Key operation: Separate keys for Open, Close and Stop.

You can also set up 2 keys where one key alternates between open and close and the second key is a stop. For the open/close key just create a normal toggle key and set the GA to the shutter, then add a 3 key stop tool.

The way it works is by setting the GA to specific values:

0%: close
1%: close/stop toggle
2%: stop
98%: open/stop/close/stop
99%: open/stop
100%: open

 

Thanks a lot, new I was missing something simple.

 

Shutter control

Can I use the same configuration in L5504RVFC?
I would like to control the blinds connected to this relay with the C-TOUCH Spectrum but I'm confused how to achieve the correct configuration in PICED. As I understand I need to create scenes for this purpose. Can anyone teach me how to do this in PICED?