SO i need to make modifications on someone elses job... HELP

guys ive been given a list by a sparky (luckily a good mate of mine)
for a client that wants modifications done to his C bus network
LISTED BELOW:

Scenes for CBUS


GOODBYE
Turns off all lights in the house, shuts all blinds.
Allocate one switch in garage for Goodbye Scene

I am struggling to remember from my course notes how to trigger a scene that is on his c touch!
Is this the way to do this command and similar like it when the command is to be initiated from a button press rather then a DLT or a Screen?


WELCOME
Downstairs Hallway light, stair step lights, Upper hallway light

this could be from a scene also


ENTERTAINING
Kitchen pendants on.
Kitchen LCD under cupboard lighting on.
Lounge downlights at 75%
Dining area Middle downlights only.
Chandelier on.
Stairs step light on.
Upstairs hall on.
Front up/down lights on (entrance, garage, front entry)
Courtyard on.



HOLIDAY
Alternate between Night A, Night B
Night A:
Kitchen light on 7pm, off at 9pm
Computer area on at 8pm, off at 9.30pm
Office on 9.30 ? 10pm
Front entry light, Courtyard, 7pm ? 9pm
Garage updown light, Front updown lights 8pm ? 10pm

Night B:
Kitchen light on 7pm, off at 9pm
Underbench lights 9pm ? 10pm
Upstairs hallway on at 8.00pm, off at 10pm
Front entry light, Courtyard, 7pm ? 9pm
Garage updown light, Front updown lights 8pm ? 10pm


GOODNIGHT
Turn off all lights in house except Stair step lights, master bedroom, master ensuite and guest room, guest bathroom.





All Bathrooms
Turn off lights, bathroom heater, fans after 1hr automatically.

Guest Wardrobe.
Turn off light automatically after 1 hr.

Outdoor lights
Not to come on automatically, except courtyard at 7pm
Courtyard off after 9pm

Light switches in bedrooms
Master bedroom ? DLT. No backlight (Turn backlight off after 20 seconds when used)
Other bedrooms: The blue circles around the light switches. Turn down at night time to 40% so it doesn?t illuminate bedroom.


Connect Wiser for Internet external connection

Connect 6.5? Screen with Internet




This being my FIRST cbus job I am feeling slightly overwhelmed but am just going through one at a time Any help appreciated

 

Hey,

Do you have the project xml and screen files? If you have them, it will be easy, if you don't it will be rather difficult and time consuming.

Can probably help walk you though it virtually if you have those files, if you don't you will need to go and map out the addressing in the house again :-/

J

 

email and inbox message sent
thanks John