Subversive Data Gathering by Clipsal?

Discussion in 'C-Bus Toolkit and C-Gate Software' started by build, Nov 27, 2007.

  1. build

    build

    Joined:
    Nov 17, 2006
    Messages:
    24
    Likes Received:
    0
    Check your logs, ToolKit 1.7.3 is sending out packets to clipsal.
    WHY?

    I hope this is just sloppy coding and not subversive data gathering.
    A response from the code writers would be nice.

    Thanking you in anticipation,
    build
     
    build, Nov 27, 2007
    #1
  2. build

    MIB

    Joined:
    Feb 22, 2006
    Messages:
    56
    Likes Received:
    0
    Hi Build,

    Have you clicked Send button in an unexpected error dialogue, or used the <i>Report a Problem</i> feature located in the Help menu lately?
     
    MIB, Nov 28, 2007
    #2
  3. build

    build

    Joined:
    Nov 17, 2006
    Messages:
    24
    Likes Received:
    0
    Thanks for the reply.
    No neither.
    I've spoken with the tech guys and am reasonably satisfied this is just DNS inquiries.
    Thanks all,
    build
     
    build, Dec 2, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Can you use regular data routers to transmit C-Bus signals

  2. Flashing CBUS Data light on Relay

  3. ReadSerial of new data requires Delay() ?

  4. B&W data upload

  5. Presenting string data on C-Bus

  6. Transfer of project data

  7. Reading Data into HomeGagte/Schedule Plus

Loading...