Thermostat

Hi Guys
Has anyone been able to get control of their ducted heat and evap cooler on C-bus. Stock standard controls of a typical domestic installation attached. I imagine it has been asked a thousand times, I'm wondering if there is a simple yet effective way of control.
Cheers TIA
Brad
http://s21.postimg.org/qd774k1hz/Cool.jpg
http://s4.postimg.org/ld14616t9/cbus.jpg
http://s12.postimg.org/56c1k73z1/Heat.jpg

 

Hi Brad,

I changed over my existing thermostat to a Cbus one with on board relays
I have gas furnace and refrigerated cooling (2seperate units) from the one thermostat

I had it successfully working locally from the thermostat and remotely from wiser for 12-18 months then about 12 months ago I could no longer control it via the wiser app locally or remotely, I have just had the thermostat replaced under warranty as tech support put it down to a faulty unit but still not having any success.

I found by accident that when I power up the thermostat it works via the wiser for about 5-10 minutes then ceases to work and I can only turn on the plant from the thermostat. ( I have tried this twice removing the thermostat off the wall, then plugging it back in and it works for 5-10 minutes both times) Haven't had time to play with it any further to see what is going on. It's quiet annoying. Has anyone else experienced any issues with their Cbus thermostats and wiser?

In saying that. When it was working it was really useful.