Time Clocks Request Refresh

Discussion in 'C-Bus Wired Hardware' started by Yoshi, Jan 25, 2013.

  1. Yoshi

    Yoshi

    Joined:
    Nov 17, 2006
    Messages:
    103
    Likes Received:
    0
    I'm very sorry this is duplicate post of my C-Bus trouble.

    I got a logging data from Diagnostic Utility in Network Error condition.

    I found wrong data in it.

    2012/12/31 11:02:38 0:00:12 Source Unit 245 Time Clocks: Request Refresh
    2012/12/31 11:06:35 0:00:08 Source Unit 245 Time Clocks: Request Refresh
    2012/12/31 11:16:57 0:00:28 Source Unit 121 Time LENGTH ERROR
    2012/12/31 11:18:31 0:00:01 Source Unit 245 Time Clocks: Request Refresh
    2012/12/31 11:32:54 0:00:03 Source Unit 245 Time Clocks: Request Refresh
    2012/12/31 11:32:54 0:00:00 Source Unit 245 Time Clocks: Request Refresh
    2012/12/31 11:36:11 0:00:05 Source Unit 121 Time Clocks: Unknown LENGTH ERROR

    Spectrum(245) sent "Time Clocks Request Refresh" and
    WISER(121) sent "LENGTH ERROR" of Time Clock command.
    Spectrum sent wrong data command which has non registered group number in ToolKit.

    I don't understand why Spectrum sent "Time Clocks Request Refresh" commands in Network Error condition.
    I did not get "Time Clocks Request Refresh" command in stable C-Bus network.

    Please tell me why "Time Clocks Request Refresh" commands were sent by Spectrum.
     
    Yoshi, Jan 25, 2013
    #1
  2. Yoshi

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    A device like Spectrum needs to find a C-Bus date / time master, in order to get a network time and date from that master.

    To do this, it sends a request for a master to transmit the date and time.
     
    ashleigh, Jan 26, 2013
    #2
  3. Yoshi

    Yoshi

    Joined:
    Nov 17, 2006
    Messages:
    103
    Likes Received:
    0
    Hi ashleigh,

    Thank you very much for your comment.
    I would like to know when the unit sent "Time Clocks Request Refresh" command.
    I arranged Diagnostic Utility at another stable C-Bus network.
    It has also Spectrum unit.
    I did not get "Time Clocks Request Refresh" command in it.

    I think, "Time Clocks Request Refresh" command is point of getting cause of Network Error trouble.

    I need your help.
     
    Yoshi, Jan 26, 2013
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. How to rescue your network when all C-Bus clocks are turned off

  2. C-Bus clocks and burdens

  3. 06-004-1 Enable C-Bus Clocks Using Learn Mode

  4. 06-014-1 Realitime Clocks

  5. Refresh Group Addresses in PICED

  6. Toolkit Refresh

  7. Using the refresh option

  8. Edlt Error loading config after refresh

Loading...