Timer Issue

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by titsonabull, Jan 2, 2009.

  1. titsonabull

    titsonabull

    Joined:
    Jan 4, 2007
    Messages:
    3
    Likes Received:
    0
    Hi,

    I?ve been trying to control the heating using scenes and having the timer show up on the C-Touch counting down the time remaining. However I?ve also got the immersion running on a timer and when the heating scene is activated (has a different time to the immersion) the heating time is transferred to the immersion component and visa versa when the immersion is activated.

    Is there any way around this?

    Thanks in advance,

    Colin
     
    titsonabull, Jan 2, 2009
    #1
  2. titsonabull

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    You haven't provided quite enough information for us to be able to understand your problem.

    Do you have two different timers controlling the same group address? If so, then when you start one, the other timer will show the same value. There is no way around this.
     
    Darren, Jan 4, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Timer or Long Keypress - can't do both?

  2. Timer delay off (Now that's a newbie question)

  3. Light toggle & fan run-on timer with 1 key?

  4. KEY4 Changing timer value.

  5. Is there a way to have a non retriggerable timer.

  6. Toggle timer issue with blind control

  7. Timer issue

Loading...