Toolkit 1.10.1 issue

Discussion in 'C-Bus Toolkit and C-Gate Software' started by MHeaton, Oct 26, 2011.

  1. MHeaton

    MHeaton

    Joined:
    Apr 22, 2008
    Messages:
    107
    Likes Received:
    2
    Location:
    London
    In the KEYBL5 8-button DLT config screen the primary/secondary button for channel 4 or 8 does not change as you tab between buttons 1-4 and 5-8. If you save it the same setting applies to both channels.

    Thanks
    Mark
     
    MHeaton, Oct 26, 2011
    #1
  2. MHeaton

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    A very out of date Toolkit version, now at 1.11.10
     
    Dave Byron, Oct 26, 2011
    #2
  3. MHeaton

    MHeaton

    Joined:
    Apr 22, 2008
    Messages:
    107
    Likes Received:
    2
    Location:
    London
    Sorry - I can't type -that should have said 1.11.9 (I am putting 1.11.10 on now!)
    And have repeated on 1.11.10

    Thanks
    Mark
     
    Last edited by a moderator: Oct 27, 2011
    MHeaton, Oct 27, 2011
    #3
  4. MHeaton

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    Mark
    works fine for me, is what you trying like in my pics

    Dave
     

    Attached Files:

    Dave Byron, Oct 28, 2011
    #4
  5. MHeaton

    MHeaton

    Joined:
    Apr 22, 2008
    Messages:
    107
    Likes Received:
    2
    Location:
    London
    Yes - but it is only the button 4/8 I have the problem with (and if you go back onto the tab 1-4 after changing it to secondary on the 5-8 tab I see the button 4 labelled secondary (buttons 1-3 are not affected).

    I am trying to think what else could be different - I am running on Vista, in the UK, ...


    Thanks
    Mark
     
    MHeaton, Oct 28, 2011
    #5
  6. MHeaton

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Is it possible that it's a video card driver issue, causing that part of the screen to not refresh? If you re-size the Toolkit window and move it around, preferably moving that area of the window off-screen and back on again, does it clean up?
     
    Newman, Oct 29, 2011
    #6
  7. MHeaton

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    770
    Likes Received:
    21
    Location:
    Adelaide
    Sorry for the obvious question but have you checked on the blocks tab that the block is not assigned to both keys?
     
    daniel, Oct 31, 2011
    #7
  8. MHeaton

    MHeaton

    Joined:
    Apr 22, 2008
    Messages:
    107
    Likes Received:
    2
    Location:
    London
    Daniel,
    Thanks - that allowed me to solve it - both blocks were mapped through to the same application address and changing one from primary to secondary resulted in the other changing (which I have to admit is not the intuitive behaviour I would have expected).

    Thanks
    Mark
     
    MHeaton, Oct 31, 2011
    #8
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Toolkit 1.5 Issue Keys/Blocks (Wired only)

  2. Toolkit 1.5.1 issue

  3. Toolkit 1.6.1 Issue

  4. Toolkit Issue

  5. Minor Toolkit Issue

  6. Toolkit restore issue/bug

  7. Toolkit 1.11.0 Install issue

Loading...